Slats - Astrata

Astrata slats are veneered beams for decorative interior purposes. The wooden beams give the interior a dynamic without being overly overwhelming. "Astrata slats" are always made to order and can be obtained in the most diverse types of wood, starting from 150 equal pieces.

The three-sided beams still have to be mounted on an underlying structure. This can be done in various ways such as gluing, nailing, wood dowels or with a groove and connecting lath. Drillings or a groove can be provided as an option. The four-sided beams are veneered all round and can therefore be used as a separate element. A series of beams can thus form a semi-transparent partition to divide a space.

Different beam types

There are 2 types available:

Type 3S: Three-sided veneer finish for wall or ceiling mounting only
Type 4S: veneered on 4 sides for free standing, wall or ceiling mounting there are 2 types available

Available from stock

Type 3S: 3-sided veneer for wall or ceiling application only
Type 4S: 4-sided cladding for use as room dividers and wall or ceiling applications

Type 3S - veneer on 3 sides

3040 x 31 x 31 mm (1-1/4” x 1-1/4” x 9FT 11-5/8”)

3040 x 65 x 31 mm (1-1/4” x 2-1/2” x 9FT 11-5/8”)

3040 x 80 x 39 mm (1-1/2” x 3-1/8” x 9FT 11-5/8”)

3040 x 100 x 51 mm (2” x 4” x 9FT 11-5/8”)

Type 4S - veneer on 4 sides

3040 x 65 x 31 mm (1-1/4” x 2-1/2” x 9FT 11-5/8”)

3040 x 80 x 39 mm (1-1/2” x 3-1/8” x 9FT 11-5/8”)

3040 x 100 x 51 mm (2” x 4” x 9FT 11-5/8”)

Untreated natural oak

The “Astrata slats” are supplied with a sanded real wood veneered surface. This allows you to finish them immediately to your own liking using oil, stain or lacquer to make them fit perfectly into the project, along with the rest of the furniture. Can be combined with Querkus panels.

Ready-to-use stained and lacquered